ASL10系列交流電源

更新時間：2023-04-21

簡要描述：

ASTRODYNE公司的電源產品, ASTRODYNE是美國公司, 成立于1994年, 主要些中國臺灣電源產品, 銷往美洲。ASTRODYNE亞太公司為美國ASTRODYNE資的子公司, 2000年7月在中國臺灣成立, 研發電源產品, 2004年3月成立銷售部門, 開始推廣市場, 75%產品銷往歐洲。

發郵件給我們：sales1@haonpower.com

ASL10 10 Watt Open Frame Power Supplies

	Universal 90-264VAC Input
	Molex Mini Connector I/O
	Regulated Outputs
	3000V Isolation
	Single Output from 3.3 to 24 VDC
Model Number		Output Voltage	Output Amps	Peak Load
ASL-0100		3.3 VDC	2.5 Amps	3.3 Amps
ASL-0101		5 VDC	2 Amps	2.6 Amps
ASL-0102		12 VDC	0.85 Amps	1.2 Amps
ASL-0103		15VDC	0.67 Amps	0.9 Amps
ASL-0105		24VDC	0.42 Amps	0.6 Amps

ASL10 series

Input Specifications

Input Voltage Range	90-264 VAC
Frequency Range	47-63 Hz
Inrush Current	20A @ 100VAC Input ; 40A @ 200VAC Input

Environmental Specifications

Operating Temperature	0 to +50°C（FL） See Derate
EMC	FCC/A, VDE 0871/A
Storage Temperature	-25 to +71°C *
Relative Humidity	0 to + 95%, non-cond *
MTBF	180,000 Hrs; Mil Std 217, 25°C

General Specifications

Isolation	3000VAC
Isolation Input-Ground	2500VAC
Isolation Output-Ground	1000VAC
Efficiency	75%~78%, typ
Switching Frequency	100Khz, （fixed, typical）
Safety Approvals	UL60950-1, EN60950, IEC60950

Output Specifications

Output Voltage	3.3 VDC
Output Amps	2.5 Amps
Load Regulation	± 3% AI65（2 to Load）
Line Regulation	Singles ± 0.1~1%, typ
Preset Accuracy	1%
Temperature Coefficient	±0.03%/°C
Ripple and Noise	100mV Pk-Pk, typ
Over Voltage Protection	Clamp, 130-15 *
Over Temperature Protection	Latching, Cool and Repower
Short Circuit Protection	Continuous, self-recovering
Peak Load	3.3 Amps
DC Voltage Adjust （typ.）	± 6% of FS （Primary）

Physical Specifications

Size （mm）	50.8 x 57.91 x 16.76 mm
Size （Inches）	2” x 2.28” x 0.66”
Construction	Open Frame
Weight （g）	44g
Weight （oz）	1.6oz

Notes

* These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.